$6.98
|Â 13% OFF Phone Price : $7.98
CONFIRM THE PART FITS
Refrigerator Auger Motor EAU59551201
Part #EAU59551201
Replaced by #EAU59551204
?
Manufacturer substitution
This part replaces EAU59551201. Substitute parts can look different from the original.
Online Only Price
$52.52
|Â 10% OFF Phone Price : $58.52
In Stock
For ZIP codes near Edit
This part fits
Part Information
This dispenser ice chute door motor (part number EAU59551204) is for refrigerators.
Dispenser ice chute door motor EAU59551204 opens and shuts the ice door on the ice dispenser chute.
Safely store any food that could deteriorate while the power is off and unplug the refrigerator when installing this part. Wear work gloves to protect your hands.
Frequently Used Together
- $6.98|Â13% OFF Phone Price : $7.98
- $14.75|Â12% OFF Phone Price : $16.75
- $6.98|Â13% OFF Phone Price : $7.98
- $32.21|Â16% OFF Phone Price : $38.21
- $11.11|Â15% OFF Phone Price : $13.11
- $34.88|Â15% OFF Phone Price : $40.88
- $65.17|Â8% OFF Phone Price : $71.17
- $41.36
- $93.03|Â6% OFF Phone Price : $99.03
Top models using the same part
| Model Name | Model Number | Diagram Name |
|---|---|---|
| Model #79572036111 Kenmore bottom-mount refrigerator | 79572036111 | Dispenser parts |
| Model #79572036110 Kenmore bottom-mount refrigerator | 79572036110 | Dispenser parts |
| Model #79572039110 Kenmore bottom-mount refrigerator | 79572039110 | Dispenser parts |
| Model #79572039112 Kenmore bottom-mount refrigerator | 79572039112 | Dispenser parts |
| Model #79572033110 Kenmore bottom-mount refrigerator | 79572033110 | Dispenser parts |
| Model #79571093111 Kenmore bottom-mount refrigerator | 79571093111 | Dispenser parts |
| Model #79572032111 Kenmore bottom-mount refrigerator | 79572032111 | Dispenser parts |
| Model #79571092111 Kenmore bottom-mount refrigerator | 79571092111 | All parts |
| Model #79571093110 Kenmore bottom-mount refrigerator | 79571093110 | Dispenser parts |
| Model #79572034110 Kenmore bottom-mount refrigerator | 79572034110 | Dispenser parts |
Reviews
Tabs vs. Putty knife
The motor wasn't the problem, it was the tabs that broke off when using a putty knife to remove the cover plate. No matter how careful you are, these are obviously one time use snap in place tabs, not to be removed. Shame on the engineering...!
Grant, Arkansas
Did you find this review helpful?
- Ease of Installation
- Difficult
- Duration of Installation
- 1 - 2 hours
Installation a breeze after YouTube video
Watched a YouTube video and learned what tools and steps to remove, replace the part. the job took all of ten minutes!
Ice m d m, Kaneohe, HI
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes
Yes, I would recommend this to a friend
Very easy to install
Very easy to install. It only took 15-20 minutes to complete.
Buckeye, Florida
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Easy to Install - Very Quick Delivery
Ice Chute Motor was easy to install. I tested both the old motor and the new one with a 9 volt battery. I also replaced the power board because it has 4 relays on it to operate the ice chute and several other devices..
Fixit P, Central Coast, California
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Flawless experience
Less expensive than other sites, arrived 3 days earlier than estimated (despite the Christmas rush), installed in 20 minutes thanks to YouTube, and works perfectly. Nice to have ice again. Pay attention to the YouTube instructions and save yourself over $100 for a service call. 30 minute repair.
SAnd, Albuquerque NM
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
easy
Correct part and easy to install....thanks Problem was self diagnosed and researched. I have extensive mechanical experience which made this easy.
ice c m, Az
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes
As long as you know how to get the front cover off
Easy as long as you know how to get to the part itself.
Dusty P, Cedar Hill, TX
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour