$59.71 |Â
9% OFFÂ Phone Price : $65.71
CONFIRM THE PART FITS
Pump Motor 8564075
Part #8564075
Replaced by #W10782773
?
Manufacturer substitution
This part replaces 8564075. Substitute parts can look different from the original.
Online Only Price
$144.52 |Â
8% OFFÂ Phone Price : $156.52
In Stock
For ZIP codes near Edit
This part fits
Part Information
Helpful DIY instructions: Installation guide with video.
This pump motor (part number W10782773) is for dishwashers.
Pump motor W10782773 delivers water to the spray arms to clean the dishes during the wash cycle.
Disconnect electrical power to the dishwasher before installing this part. Wear work gloves to protect your hands.
Frequently Used Together
- $71.94 |Â8% OFFÂ Phone Price : $77.94
- $4.39 |Â19% OFFÂ Phone Price : $5.39
- $60.45 |Â9% OFFÂ Phone Price : $66.45
- $33.46 |Â15% OFFÂ Phone Price : $39.46
- $67.17 |Â8% OFFÂ Phone Price : $73.17
- $8.72 |Â10% OFFÂ Phone Price : $9.72
- $16.92 |Â11% OFFÂ Phone Price : $18.92
- $25.99 |Â19% OFFÂ Phone Price : $31.99
Top models using the same part
| Model Name | Model Number | Diagram Name |
|---|---|---|
| Model #KUDS01VMMT7 KitchenAid dishwasher | KUDS01VMMT7 | Pump and motor parts |
| Model #KUDS01DLSP7 KitchenAid dishwasher | KUDS01DLSP7 | Pump and motor parts |
| Model #KUDS01VMSS6 KitchenAid dishwasher | KUDS01VMSS6 | Pump and motor parts |
| Model #KUDP01DLBL2 KitchenAid dishwasher | KUDP01DLBL2 | Pump and motor parts |
| Model #KUDL01TKWH0 KitchenAid dishwasher | KUDL01TKWH0 | Pump and motor parts |
| Model #KUDP01ILBT2 KitchenAid dishwasher | KUDP01ILBT2 | Pump and motor parts |
| Model #KUDS01IJWH0 KitchenAid dishwasher | KUDS01IJWH0 | Pump and motor parts |
| Model #KUDS01ILBS2 KitchenAid dishwasher | KUDS01ILBS2 | Pump and motor parts |
| Model #KUDI01DLWH2 KitchenAid dishwasher | KUDI01DLWH2 | Pump and motor parts |
| Model #KUDI01ILBT2 KitchenAid dishwasher | KUDI01ILBT2 | Pump and motor parts |
Reviews
Thermistor hole is the wrong size
I have an older Kitchenaid dishwasher (model kuds01djss0) and unfortunately like other reviews mention the port for the Thermistor on the motor housing is the wrong size, the new housing has a much larger hole than the old part and does not fit.
Not H, Essex Junction, VT
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Fairly easy to install tly
It was fairly easy to install and it took about an hour. Take pictures before you start to remove the old motor
Russell, Michigan
Did you find this review helpful?
- Ease of Installation
- Difficult
- Duration of Installation
- 1 - 2 hours
Yes, I would recommend this to a friend
Part arrived as described.
Installation was fairly easy to install. A second set of hands is very helpful to hold part in place while installing holders. Also a little dish soap helps seal slide in better.
Mr. f i, NC
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Our Kenmore dishwasher had a different thermistor
Our Kenmore dishwasher model 665.16263400 uses a different thermistor. The housing for the new pump motor has a much bigger hole for the thermistor. I ordered the new thermistor and I hope it fits the new pump motor housing, another $75.
IanT, Redwood City, CA
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Part didn't work
This part never worked. It arrived on time and was easy to install. Thankfully it was just as easy to remove. Had to buy from a local supplier to get appliance to work as the pump motor never worked.
Frodo, Minneapolis, MN
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Wrong
I was sent the wrong part with my dishwasher in pieces in kitchen. Have to wait a week for hopefully the right one.
lipp, md
Did you find this review helpful?
- Ease of Installation
- Very Difficult
- Duration of Installation
- More than 2 hours
replace pump and motor
upon watching videos, it seemed like an easy chore. But for some unknown reason the rubber gasket would not fit into the base. I even tried lube to no avail, it was just too tight. on the second day, I was able to pry it enough to put the three retainers in. It still didn't seat properly, but it won't leak. The remainder went easily.
Joe Y, Undisclosed
Did you find this review helpful?
- Ease of Installation
- Very Difficult
- Duration of Installation
- More than 2 hours
Yes, I would recommend this to a friend
Easy job for a beginner
I watched a youtube video first, it was right on with the proceedure. I already had old assembly out , replacing it took less than an hour to be done and all put away. Works great, like a new dishwasher now for less than $130.00!!!!
Darryl27, New York
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour