CONFIRM THE PART FITS
Part Information
Cold water inlet valve 00422244 is an original equipment manufacturer (OEM) part that fits some Bosch washers in these series: WFMC, WFVC and WFXD.
Water inlet valve 00422244 controls the cold water flow into the washer.
Replaces original Bosch washer cold water inlet valve part number 422244.
Frequently Used Together
- $38.99 |Â13% OFFÂ Phone Price : $44.99
- $16.09 |Â11% OFFÂ Phone Price : $18.09
- $15.09 |Â12% OFFÂ Phone Price : $17.09
- $6.69
- $5.91
- $68.79 |Â8% OFFÂ Phone Price : $74.79
- $119.00 |Â9% OFFÂ Phone Price : $131.00
- $105.31
- $67.79 |Â8% OFFÂ Phone Price : $73.79
Top models using the same part
Model Name | Model Number | Diagram Name |
---|---|---|
Model #WFMC5301UC/12 Bosch washer | WFMC5301UC/12 | Pump/dispenser |
Model #WFMC5301UC/04 Bosch washer | WFMC5301UC/04 | Pump/dispenser |
Model #WFMC544SUC/15 Bosch washer | WFMC544SUC/15 | Dispenser/sump/pump |
Model #WFMC6400UC/01 Bosch washer | WFMC6400UC/01 | Pump assembly |
Model #WFVC5400UC/28 Bosch washer | WFVC5400UC/28 | Pump/dispenser |
Model #WFMC220BUC/15 Bosch washer | WFMC220BUC/15 | Pump assy |
Model #WFVC5400UC/26 Bosch washer | WFVC5400UC/26 | Pump/dispenser |
Model #WFVC844PUC/20 Bosch washer | WFVC844PUC/20 | Dispenser |
Model #WFMC8440UC/13 Bosch washer | WFMC8440UC/13 | Sump/pump/heater |
Model #WFMC6401UC/02 Bosch washer | WFMC6401UC/02 | All parts |
Reviews
Easy to install
It did only 20 minutes and the washer works great.Did not feel like spending 800.00 dollars. The part came very quickly, very pleased
Wash w, Pinellas Park
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes
Yes, I would recommend this to a friend
Cold Water Inlet Valve - Bosch Nexxt 500 Series
Very easy to install only two torque tip screws to remove the top cover. Need a plier for the hose line clamps. The difficult part of it was moving the washer.
Hector, Navarre, FL
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes
Yes, I would recommend this to a friend
This was so easy ever for two retired grandparents
The most difficult part was getting to the rear of the machine. We were able to accomplish that and the installation of the valves were so simple at that point.
nonni a p, Richmond VA
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Easy to install
it was easy to install - 30 min including removing
Bentec, Undisclosed
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- 30 minutes - 1 hour
Easy Peesy to install
Mush easier to figure out how to install than it was to get the old leaky one off. Done in 5 minutes, but I took the top of the washer off and the back off also. 3 hose clamps and a bunch of screws then done. No more water on the floor.
Ace i W F, Buffall
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes
Just what we needed.
I don't think it took five minutes to install. Works like it is supposed to. Probably saved us $150 over a service call.
Sdlars, SD
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes
water inlet valves
Parts were exactly what I ordered and arrived when they said that they would. They fit my machine and solved my problem. I'll use parts direct again when needed.
mine, Undisclosed
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour