$22.08 |Â
21% OFFÂ Phone Price : $28.08
CONFIRM THE PART FITS
Sensor 63-5013
Part #63-5013
Replaced by #WP338906
?
Manufacturer substitution
This part replaces 63-5013. Substitute parts can look different from the original.
Online Only Price
$38.79 |Â
13% OFFÂ Phone Price : $44.79
In Stock
For ZIP codes near Edit
This part fits
Part Information
This radiant sensor (part number WP338906) is for dryers.
Radiant sensor WP338906 monitors whether the igniter is hot enough to ignite gas to light the burner.
Unplug the dryer before installing this part and wear work gloves to protect your hands.
Frequently Used Together
- $29.18 |Â17% OFFÂ Phone Price : $35.18
- $32.80 |Â15% OFFÂ Phone Price : $38.80
- $44.11 |Â12% OFFÂ Phone Price : $50.11
- $19.12 |Â9% OFFÂ Phone Price : $21.12
- $16.39 |Â11% OFFÂ Phone Price : $18.39
- $48.99 |Â11% OFFÂ Phone Price : $54.99
- $18.96 |Â10% OFFÂ Phone Price : $20.96
- $200.72 |Â6% OFFÂ Phone Price : $212.72
- $29.06 |Â17% OFFÂ Phone Price : $35.06
Top models using the same part
| Model Name | Model Number | Diagram Name |
|---|---|---|
| Model #SLG332RAW Speed Queen dryer | SLG332RAW | Gas valve, igniter & gas conversion kit |
| Model #SLG332RAW-PSLG332R Speed Queen dryer | SLG332RAW-PSLG332R | Gas valve & igniter (series 16) |
| Model #ALG643RAW-PALG643* Amana dryer | ALG643RAW-PALG643* | Gas valve, igniter & gas conversion kit |
| Model #ALG956EAC-PALG956EAC Amana dryer | ALG956EAC-PALG956EAC | Gas valve, igniter & gas conversion kit |
| Model #ALG866SAW-PALG866SAW Amana dryer | ALG866SAW-PALG866SAW | Gas valve, igniter & gas conversion kit |
| Model #ALG866SBW-PALG866SBW Amana dryer | ALG866SBW-PALG866SBW | Gas valve, igniter & gas conversion kit |
| Model #ALG643RAC-PALG643RAC1 Amana dryer | ALG643RAC-PALG643RAC1 | Gas valve, igniter & gas conversion kit |
| Model #ALG866SBC-PALG866SBC Amana dryer | ALG866SBC-PALG866SBC | Gas valve, igniter & gas conversion kit |
| Model #ALG643RBW-PALG643RBW Amana dryer | ALG643RBW-PALG643RBW | Gas valve, igniter & gas conversion kit |
| Model #ALG866SAC-PALG866SAC1 Amana dryer | ALG866SAC-PALG866SAC1 | Gas valve, igniter & gas conversion kit |
Reviews
you said it would fit my dryer.
your site said it was for this dryer,,his part did not fit my dryer. i now i m stuck with a part that does go on my gas dryer..i.t must be for a elect(. dryer mine is gas. )
none, lacombe la. 70445
Did you find this review helpful?
- Ease of Installation
- Very Difficult
- Duration of Installation
- More than 2 hours
Yes, I would recommend this to a friend
Works Great
Installation was easy, because, the sensor in my Kenmore dryer was accessible after opening access panel, located below the door. However, I had unplugged the dryer before opening the front panel.
NAC1, NJ
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Parts
you guys sent me the wrong part, I need to return it.
Undisclosed, Los Angeles, CA
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes
Yes, I would recommend this to a friend
Flame sensor
Easy to install one screw and two wires. The only bad part is you have to dismantle the front and remove the tub. Just part of the process.
Frank K, Undisclosed
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- 1 - 2 hours
Yes, I would recommend this to a friend
easy to install
unit was easy to install and acureate about 15 minutes
Richard N, phila pa.
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes
Got the correct part & it got here fast.
Went in & tested fine; followed by a huge laundry load.
Monny, Carteret, NJ
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour
the part was fine, the dryer too old to fix
easy to install but needed many other parts--opt for new machine waiting fund of part
weeks, Undisclosed
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour
Easy to install
It was easy to install took 2 hours to remove all components and reverse the process great chance to clean all parts covered in dust and lint. regrease all roller bears .
Sawman 1, Mass
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour