CONFIRM THE PART FITS
Part Information
This plunger and spacer (part number 7234325) is for reverse osmosis systems.
Plunger and spacer 7234325 helps control the flow of water through the filters.
Shut off the water supply to the reverse osmosis system before installing this part. Wear work gloves to protect your hands.
Top models using the same part
Model Name | Model Number | Diagram Name |
---|---|---|
Model #625384750 Kenmore reverse osmosis system | 625384750 | Drinking water system |
Model #625384720 Kenmore reverse osmosis system | 625384720 | Drinking water system |
Model #625385720 Kenmore reverse osmosis system | 625385720 | Reverse osmosis water system |
Model #WHER12 Whirlpool reverse osmosis system | WHER12 | Reverse osmosis drinking system |
Model #625385700 Kenmore reverse osmosis system | 625385700 | Reverse osmosis water system |
Model #625385750 Kenmore reverse osmosis system | 625385750 | Reverse osmosis water system |
Model #WHER18 Whirlpool reverse osmosis system | WHER18 | Reverse osmosis drinking system |
Reviews
Part missing
The plunger part of the 2 parts were missing. Had to call Sears & wait on a new part. A little irritating.
May-44, Vandalia, IL
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes
Easy to repair
I installed these on a Whirlpool WHER25 RO system. Installation was easy. There are videos online.
Todd-T, Undisclosed
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes
Work fine !
Was able to stop the leak on the filter, but way way overpriced for what it is!!
Viny, Miami
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes
Fail
It should have been an easy install. Not sure why, but air gap started leaking air and water after the install. I woke up to a counter full of water. I've given up on refurbishing the RO. Returning the parts and going for a more modular new one.
Pick a n, Las Vegas
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes
Precision OEM Quality Parts for My Sears RO Unit
I had to replace the plunger unit because after over 15 years of service the rubber diaphragms in the shut off valve cracked causing a leak through the flange of the shutoff valve. The replacement parts ordered from the manual were quality precision parts just like those originally installed in unit. Just make sure you install the plunger unit and the diaphragms correctly. While doing this repair it also make sense to replace the Check Ball assembly and O ring. While putting the cover back on the plunger assembly I found it easier to place the Check Ball O ring on the cover neck rather than into the Check Ball cavity. The cover flange will then pop in place with pressure applied.
DIY F, Ventura, Calif
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour
Fit perfectly
Easy to install
CCC1, Kansas City
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes
Easy to install
Four screws and these parts were replaced with ease. Only took me about 5 min to fix
Toddtribe, San Angelo, Tx
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes