Can’t find your part?   Contact us:
+1-309-603-4777
Sears Parts Direct
Tips to find your model number
Orders

  • Keep track of the models you own in your profile

    Sign in or Register to view or add models

Schedule a repair
KitchenAid Gas wall ovens

Official KitchenAid gas wall oven parts

KitchenAid gas wall ovens are known for their top baking performance and dependability. Controls used in KitchenAid gas wall ovens help maintain consistent temperature control so every item you bake comes out perfect. When your KitchenAid gas wall oven isn't working properly, find the repair parts you need to fix the oven at Sears PartsDirect.

KitchenAid gas wall oven common replacement parts

  • Control panel. The gas wall oven control panel houses the control keypad, temperature display and other displays. Switches and the electronic control board are attached to the control panel.
  • Door light switch. The oven door light switch is a plunger switch on the frame of the oven above the opening to the oven. The oven door pushes the oven light switch plunger in when the door is closed to turn the light off. When the door is open, the plunger is released and the light is on.
  • Outer oven door glass panel. The outer oven door glass panel is the heat-resistant piece of glass that forms the outer part of the oven door window.
  • Oven door hinges. The hinges on an oven door control the rate at which the door opens and also allow the door to stay open at an angle. Hinges are usually installed in pairs so the hinges and tension springs match, ensuring the smooth operation of the door.

How to replace the temperature sensor in your KitchenAid gas wall oven

  1. Shut off all electricity to the gas wall oven. Turn the gas shut-off valve to the off position. Wear work gloves to protect your hands during the repair.
  2. Find the temperature sensor probe in the top left corner of the back wall of the oven interior. Using a 1/4-inch nut driver, remove the 2 hex head screws from the base of the temperature sensor probe.
  3. Carefully pull the oven temperature sensor probe forward into the oven interior. The wires connected to the probe have enough slack that you can pull it a just few inches—far enough to disconnect the wires. As you pull, use needle-nose pliers to guide the wire harness connector through the hole in the oven wall. Pull the temperature sensor probe a few inches forward so you can reach the wire connector.
  4. Holding the connector with needle-nose pliers, depress the locking tab on the plug and disconnect the plug from the sensor probe. Don't let the connector slip back through the hole, or you must remove the back panel of the oven to retrieve it.
  5. While holding the connector with a pair of needle-nose pliers, snap it into the plug of the new probe. Push the wire into back wall of the oven. Position the new sensor probe and line up the holes for the mounting screws. Insert the mounting screws and tighten firmly using a nut driver.
  6. Turn on the electricity and the gas.

Parts & More