$180.65 |
6% OFF Phone Price : $192.65
CONFIRM THE PART FITS
Refrigerator Ice Maker Assembly (replaces 2198678, 2198957, 626663, W10122502, W10190960) 2198597
Part #2198597
Online Only Price
$98.88 |
11% OFF Phone Price : $110.88
Back Order
This item has a wait list. Order now to save your place on the list
This part fits
Part Information
This ice maker (part number 2198597) is for refrigerators.
Ice maker 2198597 includes the ice mold and the control device. The ice maker receives water from the water inlet valve and then holds the water in the ice mold until the water freezes solid. It then automatically ejects the ice and refills to continue the process until the ice storage in is full.
If your ice cubes seems small, it could be time for a new water filter. You can find your filter here.
Safely store any food that could deteriorate while the power is off and unplug the refrigerator when installing this part. Wear work gloves to protect your hands.
Frequently Used Together
- $79.63 |7% OFF Phone Price : $85.63
- $86.47 |6% OFF Phone Price : $92.47
- $40.67 |13% OFF Phone Price : $46.67
- $54.00 |10% OFF Phone Price : $60.00
- $41.79 |13% OFF Phone Price : $47.79
- $48.73 |11% OFF Phone Price : $54.73
- $10.87 |16% OFF Phone Price : $12.87
- $36.04 |14% OFF Phone Price : $42.04
Top models using the same part
Reviews
Should Have Done It Sooner
Been putting off ordering this, afraid it wouldn't fix my problem (fridge not making ice) and then I'd have wasted the money to buy it. So I've been living without an ice maker for at least a year. Finally closed my eyes and jumped (ordered it). Wish it didn't cost as much as it does, but it DID fix my problem and we have ice again! The change-out wasn't hard, but I had already gone through the exercise of removing the old one and putting it back in, so I had some familiarity. YouTube videos helped tremendously.
Tom H, Oklahoma
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Seemingly refurbished parts instead of new
Boxed with soil inside at refurbishment site and was packed with a broken part - this did not happen during shipping. Wont buy again.
Bugly, Houston, Texas
Did you find this review helpful?
- Ease of Installation
- Difficult
- Duration of Installation
- 1 - 2 hours
Yes, I would recommend this to a friend
Unhappy
The one I received was broken and looked used. I sent it back and ordered another which has not been delivered. It's been weeks.
Blake, East Texas
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Kenmore Elite
Exact fit for a 20 year old Kenmore Elite refrigerator!!
Din', NM
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour
Works As Advertised
Great replacement. Delivery was fast. Easy install after watching online videos.
HighSpeedFlyer, Scottsdale, AZ
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Replacement of the ice making unit
The part Installed easily. It did begin working. It does seem slightly slower in producing ice as the original. Very thankful that it works. God bless!
Rev. V, Connecticut
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Kenmore Icemaker replacement
Icemaker was a good replacement for the one delivered with the refrigerator and went in easily. However, the ejector fingers came in broken in the undamaged box, causing me to fabricate a repair. This made a 15-minute operation into a 2-hour operation.
Dale P, Carencro, LA
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes
Yes, I would recommend this to a friend
Somewhat Easy to Install
After looking at several cheaper ice makers I decided to go with a genuine Sears part. More expensive but this was supposed to fit with no wiring issues. Well, almost. I had had the ice maker repaired by Sears several years ago and unbeknownst to me they put in a new, different wiring harness on both the ice maker and the the freezer side (the wire connector) so the new ice maker wire would not plug in. There was no rounded end. I managed to jam them together but decided instead to take the wire harness off of the broken ice maker and put it on the new one. No splicing involved, just unwrapped the connection and plugged the old harness in. Now it mated with the freezer harness. Putting it back in and tucking the wires was a bit of a chore and it took me a while to figure out how the cover on the right went back on since it just dropped out when I removed the old one. Take the top freezer shelves out so you can see it from the back. Be careful when you take the old one out. I had a devil of a time disconnecting the wire plugs and it slipped and hit the floor breaking the bottom cover. This part does not come with the ice maker and they tell you to reuse the old one. I found a less expensive one online because Sears didn't have the part in stock. I looked at several YouTube videos but it seems they were rather vague about some steps. If Sears has a video watch it because no instructions come with the part. I had already replaced the pump motor because the water dispenser started leaking and I had hoped it would fix the ice making problem but, while the new pump stopped the leaking but didn't fix the ice making problem hence this repair. The new ice maker filled and started making ice after a while, be patient. I thought it was all for naught till I realized I had forgotten to turn the water line back on. It is now working fine. Just hope it lasts a while.
Robert9510, Silly Spring MD
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 1 - 2 hours
Yes, I would recommend this to a friend