Can’t find your part?   Contact us:
+1-309-603-4777
Sears Parts Direct
Orders

  • Keep track of the models you own in your profile

    Sign in or Register to view or add models

Schedule a repair
Whirlpool Reverse osmosis systems

Official Whirlpool reverse osmosis system parts

Sears PartsDirect has the replacement parts you need to keep your Whirlpool reverse osmosis system working perfectly. Whirlpool reverse osmosis systems trap impurities from the water supply so you can have the peace of mind that the water coming from your faucet is safe. When your Whirlpool reverse osmosis system stops working as it should, find the repair parts you need at Sears PartsDirect.

Installing a saddle valve for your Whirlpool reverse osmosis system

  • Shut off the main water valve for your house and open faucets to bleed off water pressure from the cold water pipes.
  • When attaching the saddle valve to iron pipe, drill a 1/8-inch hole for the valve pin.
  • Connect the needle valve to the pipe.
  • For copper or plastic pipes, carefully turn the valve handle to pierce the pipe. For an iron pipe, turn the valve handle to shut the valve.

Replacing the O-ring in a leaking quick-connect water fitting on your Whirlpool reverse osmosis system

  • Wash your hands thoroughly before handling the water fitting.
  • Shut off the water supply to the reverse osmosis system. Open the faucet and bleed pressure off the water supply line.
  • Disconnect the water line from the quick-disconnect fitting.
  • Using a small slot screwdriver, remove the collet and O-ring from the quick-disconnect water fitting.
  • Clean the port of the disconnect fitting.
  • Lubricate and insert the new O-ring into the bottom of the port. Push the collet into the port until it locks in place.
  • Reinstall the water line and turn on the water supply going to the reverse osmosis system.

Parts & More