Official Orien wine & beverage cooler parts

Troubleshooting tips for your Orien wine or beverage cooler when it doesn't operate

• Check the controls. Make sure the wine or beverage cooler is turned on and set to the right temperature to cool your beverages.
• Check for electrical power. Make sure the power cord is plugged into a working wall outlet. If the electrical outlet is dead, reset the house circuit breaker for the outlet.
• If the electrical outlet has power, unplug the wine or beverage cooler and check the power cord for damage. Replace the power cord if it's frayed or broken. Check the power cord wiring connections on the control board. Reconnect any loose wiring connections.
• Replace the electronic control board if it's getting power but won't operate the wine or beverage cooler.

Top replacement parts for Orien wine and beverage coolers

• Leveling leg. The leveling leg adjusts to keep the wine or beverage cooler cabinet level when you install the cooler in its permanent location.
• Light switch. The light switch turns the interior light on and off when you open and close the cooler door.
• Temperature sensor. The temperature sensor detects temperature inside the wine or beverage cooler cabinet and sends a signal to the electronic control board to indicate interior temperature.
• User interface control. The user interface control allows you to select wine or beverage cooler settings.
• Compressor. The compressor is a positive displacement pump rotated by an electric motor. The compressor receives low-pressure refrigerant gas from the evaporator and rotates to compress that refrigerant to a high-pressure gas that moves through the condenser. The refrigerant gets hot when compressed by the compressor pump. The condenser is a heat exchanger that removes heat from the refrigerant gas and condenses it into a high-pressure liquid refrigerant. The high-pressure liquid refrigerant flows through the expansion device and into the evaporator that's at low pressure. The high-pressure refrigerant expands and evaporates. It absorbs the latent heat of vaporization as it changes from a liquid to a gas, which causes the cooling action in the evaporator. The refrigerant flows through the evaporator and back to the compressor where the cycles starts over.