How to adjust snowblower skid shoes
The snowblower skid shoes control the height of the auger housing, which contains the augers and shave plate. When set at the correct height, the skid shoe prevents the augers and shave plate from scraping against the ground. Skid shoes wear down during snowblower use so check shave plate height regularly and adjust the skid shoes as shown in this repair guide/video to keep the shave plate ¼-inch high.
Each skid shoe is reversible, so when one side wears out, you can flip it over and use the other side. When both sides wear out, it’s time to replace them. Follow the steps in our How to replace a snowblower skid shoe repair guide/video to install new skid shoes.
Use this basic procedure to adjust skid shoes on these brands of snowblowers:
How to adjust snowblower skid shoes video
Instructions
- 01.
Lay down cardboard
Lay down a sheet of cardboard or flattened shipping box that’s almost as wide as the shave plate.
Place the cardboard so that it’s under the shave plate but not under the skid shoes.
PHOTO: Lay down cardboard.
PHOTO: Park the snowblower over the cardboard.
- 02.
Adjust the skid shoes
Loosen the skid shoe bolts on both sides so the shoes drop down flat on the ground.
Tighten the skid shoe bolts.
PHOTO: Tighten the skid shoe bolts.
- 03.
Store the cardboard
Keep the sheet of cardboard handy so you can adjust skid shoe position regularly and prevent excessive shave plate wear.
Symptoms for gas snowblowers
Choose a symptom to see related snowblower repairs.
Things to do: replace the spark plug, change the oil, rebuild the carburetor, adjust valve lash, adjust or replace the b…
Main causes: clogged chute, damaged auger blades, broken shear pins, worn auger belt, damaged gear case, engine problems…
Main causes: dirty carburetor, stale fuel…
Main causes: punctured tire, damaged rim…
Main causes: dirty carburetor, clogged fuel filter, dirty spark plug, incorrect valve lash, leaky engine gaskets…
Main causes: stale gas, clogged carburetor, clogged or broken fuel line, dirty spark plug, bad rewind starter, incorrect…
Main causes: loose drive clutch cable, damaged drive clutch cable, worn friction disc, scraper blade scraping the ground…
Main causes: snow build-up in chute, chute drive mechanism failure, bad chute control assembly…
Main causes: clogged chute, snow build-up in auger housing, broken auger shear pins, auger drive belt needs adjustment, …
Repair guides for gas snowblowers
These step-by-step repair guides will help you safely fix what’s broken on your snowblower.
How to adjust snowblower engine valve lash
Adjust the engine valve lash on your snowblower to keep the engine starting and running smoothly.…
How to adjust snowblower skid shoes
To prevent snowblower auger and shave plate damage, adjust the skid shoes regularly to keep the shave plate ¼-inch high.…
How to replace a snowblower shave plate
Follow the 7 easy steps in this repair guide/video to replace a worn out shave plate on your snowblower.…
Effective articles & videos to help repair your snowblowers
Use the advice and tips in these articles and videos to get the most out of your snowblower.
Learn the steps to take to adjust and maintain your snowblower so it lasts longer.…
Learn about Sears Technical Institute and the advanced technical content being developed for aspiring appliance techs.…
Get answers to frequently asked questions about Sears and Sears PartsDirect.…