$31.25 |Â
16% OFFÂ Phone Price : $37.25
CONFIRM THE PART FITS
Part Information
This blower wheel (part number Y303836) is for dryers.
Blower wheel Y303836 attaches to the drive motor shaft and blows air through the drum and out through the exhaust vent
Disconnect the power before installing this part. Wear work gloves to protect your hands.
Frequently Used Together
- $8.39 |Â11% OFFÂ Phone Price : $9.39
- $27.69 |Â18% OFFÂ Phone Price : $33.69
- $8.29 |Â11% OFFÂ Phone Price : $9.29
- $12.59 |Â14% OFFÂ Phone Price : $14.59
- $8.39 |Â11% OFFÂ Phone Price : $9.39
- $16.64 |Â11% OFFÂ Phone Price : $18.64
- $8.29 |Â11% OFFÂ Phone Price : $9.29
- $19.99 |Â9% OFFÂ Phone Price : $21.99
- $25.07 |Â19% OFFÂ Phone Price : $31.07
Top models using the same part
| Model Name | Model Number | Diagram Name |
|---|---|---|
| Model #LSE7804AGL Maytag laundry center | LSE7804AGL | Motor-dryer & blower |
| Model #LDG9206AAE Maytag dryer | LDG9206AAE | Motor drive |
| Model #LDG9206AAM Maytag dryer | LDG9206AAM | Motor drive |
| Model #LDE9206ADE Maytag dryer | LDE9206ADE | Motor drive |
| Model #LDG9206ABE Maytag dryer | LDG9206ABE | Motor drive |
| Model #LDE9206ACM Maytag dryer | LDE9206ACM | Motor drive |
| Model #LSE7804AGE Maytag laundry center | LSE7804AGE | Motor-dryer & blower |
| Model #LSE7804ACM Maytag laundry center | LSE7804ACM | Motor-dryer & blower (lse7804acm & adm) |
| Model #LSE7804ADE Maytag laundry center | LSE7804ADE | Motor-dryer & blower |
| Model #LSE7800AGL Maytag laundry center | LSE7800AGL | Blower & lint screen |
Reviews
Matched the original part exactly.
To replace the blower wheel the front of the dryer needs to be disassembled including the front of the duct assembly. Once this is completed it takes a couple of minutes to replace the Blower Wheel. The project will take a couple of hours.
TJFW, Orchard, TX
Did you find this review helpful?
- Ease of Installation
- Difficult
- Duration of Installation
- 1 - 2 hours
Came Quick
Be sure to use new clamp, and check cleances before closing it up.
none, Petaluma CA
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Easy to install, quick and easy
Dryer was up and running in 15 min didn't need any special tool or instructions
kspring, Ossian, IN
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes
Yes, I would recommend this to a friend
LIke a glove
Easy install, cause i had it apart about two weeks prior, took about 25 min. Works great just original part.
Little j, Phila pa.
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
New blower
Part fit as original would have been nice if snap ring was included
Miles j, Ct
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Solved the noisy dryer problem
Installing the dryer blower wheel was a very quick job. Most of the time was spent removing cabinet screws, housing screws, and being careful not to disturb the wiring harness. A single C clip held the blower wheel to the shaft along with a clamp on the wheel to maintain tightness to the shaft. Old off, new on, done. Basic tools and a bit of patience was all the job required.
Gameah, Wells, Maine
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour
easy to install
Easy to take apart, just keep track of the screws in an organized way so you know where they go back.
gnoyes, mass
Did you find this review helpful?
- Ease of Installation
- Difficult
- Duration of Installation
- 30 minutes - 1 hour
easy to install
Remember to put back all the screws, as many screws have to be taken out in order to install this
shapes, brooklyn ny
Did you find this review helpful?
- Ease of Installation
- Difficult
- Duration of Installation
- 30 minutes - 1 hour