Dryer Drum Bearing Kit (replaces 312940, 312941) 306508

Saved the dryer drum from complete destruction!!

Worked as it should, just needed drill with 1/8 bit and rivet gun. And of course other tools to disassemble the dryer.

Ease of Installation

Moderate

Duration of Installation

30 minutes - 1 hour

Yes, I would recommend this to a friend

Easy to find the right part.

Easy to install but, had to look up how to remove the rivets and to get a rivet gun. 1/8 bit to drill the rivets out.

Ease of Installation

Moderate

Duration of Installation

30 minutes - 1 hour

Relatively easy to install

The repair took only about 15-20 min - replaced front felt and two bearing pads. There are a couple utube videos that walked me through the process. Note that the felt can be used for the rear or front

Ease of Installation

Easy

Duration of Installation

30 minutes - 1 hour

Use primer and Enamel the surface to make smooth

Oldbearingsscoredsurface useprimer/thenenamelpaint

Ease of Installation

Very Easy

Duration of Installation

Less than 30 minutes

Awful This is not a kit, it was never opened

I have nothing to advise i didnt open the product because the part was misleading and i ended up ordering the wrong thing

Ease of Installation

Moderate

Duration of Installation

30 minutes - 1 hour

Yes, I would recommend this to a friend

Maytag dryer front tumbler bearing.

Installation is moderately difficult. It involves removing the drum, which requires remmoving and reinstalling the drive bent. Not easy. Installing the bearing itself requires pop-riveting equipment. Also, one of my two kits came incomplete, The backup pad was missing. (blue part).

Ease of Installation

Difficult

Duration of Installation

1 - 2 hours

Yes, I would recommend this to a friend