CONFIRM THE PART FITS

Refrigerator Defrost Drain Pan 8201826

Part #8201826

Online Only Price
$52.78 | 
10% OFF Phone Price : $58.78
In Stock
For ZIP codes near Edit
60-day return policy

Part Information

This defrost drain pan (part number 8201826) is for refrigerators.

Defrost drain pan 8201826 collects water that empties from the drain line during the defrost cycle.

Wear work gloves to protect your hands.

Reviews

Overpriced plastic.
June 09, 2020

Does what is intended but is very very expensive for what it is - a 50 cent piece of plastic.

Jim C, Undisclosed

Did you find this review helpful?

Ease of Installation
Very Easy
Duration of Installation
Less than 30 minutes
Not exact replacement
August 22, 2018

1) The replacement tray was not an exact fit. The original tray was held in place with sheet metal "ears" that had been cut out and bent up from the refrigerator's sheet metal bottom. After removing the original tray, the "ears" needed to be bent down level with (in the same plane as) the refrigerator's sheet metal bottom. 2) The replacement tray is designed to be held in place with double faced tape (verses the metal "ears"). Unfortunately the two pieces of double faced tape provided were taped to the inside of the tray. It is impossible to remove (unstick) those pieces to move them to the bottom of the tray where they are intended to hold the tray in place. Luckily I had some double faced mounting tape. 3) No instructions were included with the part. 4) The price was high for a plastic tray, but I'm thankful the part was available. Note: My original tray leaked due to a crack where the "ears held it in place.

PI-repair, Massachusetts

1 person thought this review was helpful.

Ease of Installation
Difficult
Duration of Installation
1 - 2 hours
Suitable replacement
July 28, 2018

Part was shipped and arrived as advertised. Although it wasn't exact O.E.M. specific design and dimensions, it did fit with minor adjustments.

Drba, CT

1 person thought this review was helpful.

Ease of Installation
Moderate
Duration of Installation
Less than 30 minutes