$10.26
CONFIRM THE PART FITS
Part Information
This tine shaft bearing kit (part number 532165140) is for tillers.
Tine shaft bearing kit 532165140 supports the tine shaft inside the gear case.
Wear work gloves to protect your hands when installing this part.
Frequently Used Together
- $19.98 |Â9% OFFÂ Phone Price : $21.98
- $13.31 |Â13% OFFÂ Phone Price : $15.31
- $10.26
- $10.64 |Â16% OFFÂ Phone Price : $12.64
- $30.64
- $5.31 |Â16% OFFÂ Phone Price : $6.31
Top models using the same part
| Model Name | Model Number | Diagram Name |
|---|---|---|
| Model #917293301 Craftsman rear-tine tiller | 917293301 | Transmission |
| Model #917295551 Craftsman rear-tine tiller | 917295551 | Transmission |
| Model #917298561 Craftsman front-tine tiller | 917298561 | Repair parts, transmission |
| Model #9543291-72 Husqvarna rear-tine tiller | 9543291-72 | Transmission |
| Model #500RTTA Husqvarna rear-tine tiller | 500RTTA | Transmission |
| Model #359296250 Husqvarna rear-tine tiller | 359296250 | Transmission |
| Model #917296250 Husqvarna rear-tine tiller | 917296250 | Transmission |
| Model #917295851 Craftsman rear-tine tiller | 917295851 | Transmission |
| Model #917295852 Craftsman rear-tine tiller | 917295852 | Transmission |
| Model #917293970 Craftsman rear-tine tiller | 917293970 | Transmission |
Reviews
Gardner
Rivet pins do not fit flush in the bearing holes making it a little hard to press properly
Larry, Arkansas
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
High Quality
Very happy with parts. High quality, kit included all needed to restore to original condition. Had to use manual riveting skills I haven't used in years, but worked out great
Jimmy67, Florence, MS
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Perfect fit
Replaced all bearings in old tiller and it runs like new.
TP24, NC
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Absolute OEM parts
As my description states, these are OEM parts. Exact match to what was taken out. That is usually a good thing! In this case, this not a project for a novice. The kit comes with rivets to install the bearings. NOT pop rivets, rivets as used in construction and on some farm equipment. Unless you have experience using these fasteners and have some basic tools to do so, this repair will not end well. Next is the seal cups. After driving then in place with a hollow driver I had crushed them a bit. Obviously, at the factory they are in stalled with a press. Again , for the novice, this will just end with a damaged seal. I think the kit would be well served to come with bolts to install rhe bearings. The type similar to wheel studs which press tightly into the hole. Also maybe a note that the seals require a press to install. All this said, I am happy with the kit and the finished product!
Roger, Hebron Ohio
Did you find this review helpful?
- Ease of Installation
- Very Difficult
- Duration of Installation
- 1 - 2 hours
Yes, I would recommend this to a friend
Not Easy
Repair was difficult and time consuming to do. Requires patients. Took me over 2hrs just to take tiller apart to get to the bearings. Would not attempt this repair myself again.
Z M, Tennessee
Did you find this review helpful?
- Ease of Installation
- Very Difficult
- Duration of Installation
- More than 2 hours
Hard to install
No way to smash the ribbets without hitting bearing housing, and the seal housing was to small to fix over bearning housing resulting in distroying seal housing.
DHHA, Undisclosed
Did you find this review helpful?
- Ease of Installation
- Very Difficult
- Duration of Installation
- More than 2 hours