CONFIRM THE PART FITS
Washer Suspension Rod Kit (replaces W10189077) W10820048
Part #W10820048
Part Information
This suspension rod kit (part number W10820048) is for washers.
Suspension rod kit W10820048 supports the wash tub and keeps it stable during unbalanced loads. The kit may include multiple parts; refer to your parts diagram for a complete list of parts included.
Unplug the washer before installing this part. Wear work gloves to protect your hands.
Frequently Used Together
- $102.06 |11% OFF Phone Price : $114.06
- $24.31 |20% OFF Phone Price : $30.31
- $183.17 |6% OFF Phone Price : $195.17
- $107.21 |10% OFF Phone Price : $119.21
- $195.75 |6% OFF Phone Price : $207.75
- $3.40 |23% OFF Phone Price : $4.40
- $5.04 |17% OFF Phone Price : $6.04
- $349.93 |$12.00 OFF Phone Price : $361.93
- $68.58 |8% OFF Phone Price : $74.58
Top models using the same part
Model Name | Model Number | Diagram Name |
---|---|---|
Model #WTW6300SB2 Whirlpool washer | WTW6300SB2 | Top and cabinet parts |
Model #WTW6400SW2 Whirlpool washer | WTW6400SW2 | Top and cabinet parts |
Model #11028072800 Kenmore Elite washer | 11028072800 | Top and cabinet parts |
Model #WTW6400SW0 Whirlpool washer | WTW6400SW0 | Top and cabinet parts |
Model #11027087601 Kenmore Elite washer | 11027087601 | Top and cabinet parts |
Model #WTW6600SG3 Whirlpool washer | WTW6600SG3 | Top and cabinet parts |
Model #WTW6600SW2 Whirlpool washer | WTW6600SW2 | Top and cabinet parts |
Model #MVWB800VQ0 Maytag washer | MVWB800VQ0 | Top and cabinet parts |
Model #WTW6600SB0 Whirlpool washer | WTW6600SB0 | Top and cabinet parts |
Model #WTW6200VW0 Whirlpool washer | WTW6200VW0 | Top and cabinet parts |
Reviews
Very easy to install
New suspension rods fixed the washer t hat was shaking badly in the spin cycle.
robertz, new hampshire
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour
Was able to do the install myself
Recommend taking off the top of washer completely before attempting replacement of suspension rods. Otherwise the lid assembly adds a lot of weight.
Barbara, Reston,VA
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Fixed all of my issues
I wasn't sure this was the cause of my washer issues because my springs looked fine, but was worth the shot for the price instead of paying for a repair man. I had completely disassembled the entire washer while trying to find the issue but this would've been a very simple installation had I not done that. The springs are extremely tight and hard to pull up, I used the hook on the old Springs to pull the new springs into place and that worked like a dream. Parts delivered four days after the estimated delivery date which was inconvenient but overall I'm still very happy
Steph84, Dayton, OH
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Fast ship, superior quality, good price!
I'm using Sear's Parts Direct again. Tired of the inferior junk from other suppliers. And the price is a super bargain for the quality!
Steverino, NJ
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes
Yes, I would recommend this to a friend
Fixed the UL code
Installed a new suspension kit on my rather old Kenmore washer. It had been shaking badly when in the spin cycle and setting a UL, unbalanced load, code. Apparently the original springs had gotten weak and caused this. After kit was in I did 3 loads and no more issues!! Very happy with the results.
Steve i A, Atlanta GA
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Did the trick
My washer (Kenmore Elite Model 110.27087604) was constantly stopping because of the UL (unbalanced load) during the spin cycle (even on the low spin). I was skeptical that this would fix the issue, but it did the trick! Hopefully I'll get a few more years out of this washing machine. The replacement was easy and took me about 10 minutes
Chris, Everett, WA
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes
Yes, I would recommend this to a friend
Easy to install
It was easy to install and only took me 30 minutes or less
Cano, Ct
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes
Yes, I would recommend this to a friend
Easy too install
Glad it fixed my UL issues. Note, my old ones looked just fine and I did not think this was going to fix it, but I am happily wrong and the wife was right. Washer has had a dozen loads and no issues.
Daveintapps, Lake Tapps WA
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend