$25.04 |Â
19% OFFÂ Phone Price : $31.04
CONFIRM THE PART FITS
Whirlpool Washer Tub Bearing and Drive Shaft Kit W10435302
Part #W10435302
Online Only Price
$110.38 |Â
10% OFFÂ Phone Price : $122.38
In Stock
For ZIP codes near Edit
This part fits
Part Information
Basic Information
- Part Name: Washer Tub Bearing and Drive Shaft Kit
- Manufacturer: Whirlpool
- Category: Washer Parts
- Primary Function: This kit is essential for replacing the tub bearings and drive shaft in compatible washing machines to ensure smooth operation and eliminate noise during the wash cycle.
Installation & Compatibility
- Compatible Models: Fits various Whirlpool washer models; please confirm this part is correct for your model before ordering.
- Installation Difficulty: Complex — requires precision and care during installation.
- Tools Required: Bearing replacement tool kit (part number: W10447783).
Additional Information
The Washer Tub Bearing and Drive Shaft Kit (Part Number W10435302) from Whirlpool is a comprehensive assembly meant for the proper maintenance and repair of your washing machine. The kit includes:
- Upper and lower bearings
- Drive shaft
- Shaft nut
- Lower bearing washer
- Spacer tube
- Tub seal
- Adhesive and grease
Special Note: This kit does not include the bearing replacement tool kit (Part Number W10447783), which is essential for the installation process and must be purchased separately.
Installation Tips:
- Prior to installation, ensure the washer is unplugged and the water supply is shut off to prevent any electrical hazards or water damage.
- Always wear work gloves to protect your hands from sharp components during the installation process.
By following these guidelines, you can maintain your washer in perfect working condition, ensuring both efficiency and longevity.
Frequently Used Together
- $188.67 |Â6% OFFÂ Phone Price : $200.67
- $186.43 |Â6% OFFÂ Phone Price : $198.43
- $38.89 |Â13% OFFÂ Phone Price : $44.89
- $88.25 |Â6% OFFÂ Phone Price : $94.25
- $97.61 |Â11% OFFÂ Phone Price : $109.61
- $107.21 |Â10% OFFÂ Phone Price : $119.21
- $57.84 |Â9% OFFÂ Phone Price : $63.84
- $133.09 |Â8% OFFÂ Phone Price : $145.09
Top models using the same part
| Model Name | Model Number | Diagram Name |
|---|---|---|
| Model #MVWB750WQ2 Maytag washer | MVWB750WQ2 | Motor, basket and tub parts |
| Model #MVWB750WR0 Maytag washer | MVWB750WR0 | Motor, basket and tub parts |
| Model #MVWB850WL2 Maytag washer | MVWB850WL2 | Motor, basket and tub parts |
| Model #WTW6800WB1 Whirlpool washer | WTW6800WB1 | Motor, basket and tub parts |
| Model #11027062602 Kenmore Elite washer | 11027062602 | Motor, basket and tub parts |
| Model #WTW6200SW2 Whirlpool washer | WTW6200SW2 | Motor, basket and tub parts |
| Model #WTW6200SW3 Whirlpool washer | WTW6200SW3 | Motor, basket and tub parts |
| Model #11027072601 Kenmore Elite washer | 11027072601 | Motor, basket and tub parts |
| Model #11027042600 Kenmore Elite washer | 11027042600 | Motor, basket and tub parts |
| Model #11027052601 Kenmore Elite washer | 11027052601 | Motor, basket and tub parts |
Reviews
Gettin' it done, DIY
Kit had what I needed to do the job. The tube of adhesive was punctured and dried out, and SearsParts replaced it quickly at no charge.
BOSully, Austin, TX
Did you find this review helpful?
- Ease of Installation
- Difficult
- Duration of Installation
- More than 2 hours
Yes, I would recommend this to a friend
Quality is the difference.
I have tried after market kits and find they lack the quality and fit of the OEM. Its worth the difference. I retired from a major service company and installed a lot of these kits over the years. Save yourself a lot of grief and buy the original parts.
Ron L, Morganton, Ga.
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 1 - 2 hours
Yes, I would recommend this to a friend
Adhesive had leaked out
The adhesive tube was old and glue had leaked out all over the hub, had to scrape it all off and use a different adhesive
Gordon, New Bern North Carolina
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Bearing install
Very poor packaging. One tube was punctured. Parts
Washer r, Amsterdam, NY
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour
Installation was a breeze and repaired washer.
Disassembly is not straight forward. Had to do research to find tips and tricks. Do not purchase a special tool for the bearings, NOT NEEDED. Knock out old bearings with 6" or longer 3/8" extension. Use old bearings and deep well socket to reinstall new bearings. Seal installs itself with only even finger pressure and 1/4" extension tapping around edge to completely seat. Took 35 minutes to reassemble after prepping and cleaning.
BillieBob, Nc
Did you find this review helpful?
- Ease of Installation
- Difficult
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Easy as pie!
I ordered my part by looking up my model number. Parts were very easy to find and purchase. Delivery was fast and installation was a breeze! You may pay a little bit more than some other sites but knowing your getting a factory direct part specific to your model is worth the extra money! Very satisfied customer!
Brandy, Georgia
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes
Yes, I would recommend this to a friend
Bearing Kit has everything you need
This is tricky to do BUT there are good Youtube videos from PartsDirect that describe it step by step. You definitely need the bearing install tool, which is $20 on Amazon from XiKe Bearings - the tool costs $100 other places. However for the Xike tool, on the inside of the bigger top bearing this tool is tight. You need to shave it off so it slides on and off the bearing easily - took me 5 minutes with a file. You HAVE to buy the OEM part from Sears for the bearing kit. Yes it costs $100 but you have to get the real OEM part and all the proper grease and adhesives. I read reviews of non-OEM parts failing after a few months. The video told us to replace the stator if it has cracks. We had cracks in our stator and did not do that - the stator costs $200 and it works. If it fails we get a new washer.
Erik, Seattle, WA
Did you find this review helpful?
- Ease of Installation
- Very Difficult
- Duration of Installation
- More than 2 hours
Yes, I would recommend this to a friend
Horrible Service
Absolutely horrible help and service I am on my third order because the help do NOT KNOW WHAT THEY ARE DOING!!!! If I gfive my Model number and ask for the parts I need, how do they screw it up every time. I am now on my fourth week waiting for parts for my washing machine because they have clueless people working for them in a different country. SHAME on SEARS !!! This is why they went out of business. No Good Customer Care!! I spent the entire day trying to find out where my order is and NO ONE CAN TELL ME !!!!!! This is why I am Leaving this negative review. It shouldn't take a month to get a part. This is just WRONG !!!!!!!!
Johnny, Riverside
Did you find this review helpful?
- Ease of Installation
- Very Difficult
- Duration of Installation
- More than 2 hours
Yes, I would recommend this to a friend