CONFIRM THE PART FITS

Washer Drain Pump 00436440

Part #00436440

This part is no longer available.

We've permanently sold out of this part. It's no longer available from the manufacturer and the manufacturer has no substitute for this part. Although our call center staff is always happy to help when possible, they don't have access to this part. If you can't find that part and decide to replace the product, we invite you to visit www.sears.com

Only ground shipment is available for this item.

This part fits

Part Information

This drain pump (part number 00436440) is for washers.

Drain pump 00436440 removes water from the washer during the drain portion of the cycle.

Unplug the washer before installing this part. Wear work gloves to protect your hands.

Reviews

Original Bosch Part
June 09, 2021

Our appliance repair person installed the Bosch Pump on our washing machine and it works great.

Cloud70, Mesa, AZ

Did you find this review helpful?

Ease of Installation
Easy
Duration of Installation
30 minutes - 1 hour

Yes, I would recommend this to a friend

So easy to install. Washing machine repaired to as
December 20, 2020

Perhaps a 30 minute job, though we were very deliberate in going through all the steps. Next time might be a lot faster.

Za.Pete, Dallas texas

1 person thought this review was helpful.

Ease of Installation
Very Easy
Duration of Installation
30 minutes - 1 hour

Yes, I would recommend this to a friend

Direct replacement.
October 31, 2020

I took off the front on the washer because I decided to replace the door boot. The pump was easy to access. No problem sliding out the old pump using a flat screwdriver to push out the rubber feet. New drain hose feature is a bonus. I had already cleaned out the drain hose and the rubber flex boot from the drum. Strongly recommend cleaning all the connected equipment while accessible. Years of soap scum, etc.

Bob V, Painesville OH

Did you find this review helpful?

Ease of Installation
Easy
Duration of Installation
30 minutes - 1 hour

Yes, I would recommend this to a friend

Easy replacement part
October 07, 2020

Once we got to the pump it was an easy replacement unplug remove and install the new one and plug back in

Jenny, Somerset, Ohio

Did you find this review helpful?

Ease of Installation
Easy
Duration of Installation
1 - 2 hours

Yes, I would recommend this to a friend

Easy in stall of washer drain pump.
June 28, 2018

You only need a par of pliers to remove the hose clamp and the rest can be done by hand. The only hard part was placing the plug on the back of pump because you can not see it, you have to feel it, and you may need a screwdriver to help remove old pump to push on rubber feet, mine was stuck. It took me about 20 min. to do the hole thing. I am a house wife and I did this repair myself. I think this can be done anyone.

Shawna, Sandy Valley, Nevada

2 people thought this review was helpful.

Ease of Installation
Easy
Duration of Installation
30 minutes - 1 hour