This ice maker optic board set (part number W10757851) is for refrigerators.
Ice maker optic board set W10757851 senses ice cube level in the ice bucket and shuts off ice production when the bucket is full. Set also prevents the ice maker from ejecting ice when you open the freezer door. Set includes emitter and receiver optic boards.
Safely store any food that could deteriorate while the power is off and unplug the refrigerator before installing this part. Wear work gloves to protect your hands.
Easy to find on website. Was the right part. Took only about 10 mins. from start to finish. Works perfect. My freezer stop making ice, and noticed the eye was not working. I could tell the water was going into ice tray but won't dump. Ordered part, and everything works just fine.
Ease of InstallationVery Easy
Duration of InstallationLess than 30 minutes
verified customer
Yes, I would recommend this to a friend
Was this review helpful?
Quick exchange when parts not complete !
October 06, 2019|Hodaka 7, El Paso, Tx
Easy repair If your mechanical inclined !!!!!!!!!!
Ease of InstallationVery Easy
Duration of InstallationLess than 30 minutes
verified customer
Was this review helpful?
Simple install
February 03, 2019|Fjarnskarggle, Atlanta
10mins start to finish - anyone with a screwdriver can do it.
Ease of InstallationVery Easy
Duration of InstallationLess than 30 minutes
verified customer
Was this review helpful?
Very easy to install
July 11, 2018|CS74, Virginia Beach
I was able to easily identify the problem with the help of online tutorials.
Ease of InstallationVery Easy
Duration of InstallationLess than 30 minutes
verified customer
Was this review helpful?
The best!
April 28, 2018|jan262, Middletown, CA
It was easy for our technician to install it. It would not have been easy for the average person, as it was a computer chip, which sent the signal.
Ease of InstallationModerate
Duration of Installation30 minutes - 1 hour
verified customer
Was this review helpful?
works great
March 19, 2022|Gail, Illinois
Shipping was quick . Parts worked great so far . I felt cost was high even though I realize computer chips are high right now .
Ease of InstallationEasy
Duration of Installation30 minutes - 1 hour
verified customer
Yes, I would recommend this to a friend
Was this review helpful?
Ice Maker repair
September 02, 2020|Undisclosed, Saint Helens Oregon
Easy to replace, boards were correct. Some confusion about when product would ship required a 2nd call and a reship request.
Ease of InstallationVery Easy
Duration of InstallationLess than 30 minutes
verified customer
Yes, I would recommend this to a friend
Was this review helpful?
Relatively Easy to Install
August 19, 2019|Feeling A, Vermont
The only difficulty I encountered was preforming the repair on a working freezer where the wiring harness was freezing cold. This made the wires stiff and not as pliable as the harness in the instructional video. I let the harness warm a little and carefully eased from the casing. Yes, before I started the repair, I turned off the refridgerator at the circuit breaker.
verified customer
