$31.90 |Â
16% OFFÂ Phone Price : $37.90
CONFIRM THE PART FITS
Part Information
Chute retainer ring 337227MA is an original equipment manufacturer (OEM) part that fits some Craftsman, Murray, MTD, Canadiana, Dynamark, Signature and Noma snowblowers.
Inner chute retainer ring 337227MA helps hold the chute in place and allows it to turn.
Base measures approximately 6.5 inches in diameter.
Replaces original snowblower inner chute retainer ring part numbers 337227 and 585194.
Fits some snowblowers in the following series: Craftsman 536, 950 and C950; Murray 622, 624, 627 and 629; MTD 624; Canadiana F22, F23, F24, F28, G22, G24, and G28; Dynamark G22, G24, G28 and DY-824; Signature F22, F23, F24, G22, G28 and DY-824; and Noma G24, G27 and DP-826.
Frequently Used Together
- $12.09 |Â14% OFFÂ Phone Price : $14.09
- $26.25 |Â19% OFFÂ Phone Price : $32.25
- $29.80 |Â17% OFFÂ Phone Price : $35.80
- $20.58 |Â23% OFFÂ Phone Price : $26.58
- $58.23 |Â9% OFFÂ Phone Price : $64.23
- $27.78 |Â18% OFFÂ Phone Price : $33.78
- $31.01 |Â16% OFFÂ Phone Price : $37.01
- $6.89 |Â13% OFFÂ Phone Price : $7.89
- $11.06 |Â15% OFFÂ Phone Price : $13.06
Top models using the same part
| Model Name | Model Number | Diagram Name |
|---|---|---|
| Model #536887751 Craftsman gas snowblower | 536887751 | Discharge chute |
| Model #629909X54B Murray gas snowblower | 629909X54B | Discharge chute |
| Model #627804X6C Murray gas snowblower | 627804X6C | Discharge chute |
| Model #G2254010 Canadiana gas snowblower | G2254010 | Chute assembly |
| Model #G2254010 Dynamark gas snowblower | G2254010 | Chute assembly |
| Model #G2254010 Signature gas snowblower | G2254010 | Chute assembly |
| Model #C950524302A Craftsman gas snowblower | C950524302A | Discharge chute |
| Model #629904X54A Murray gas snowblower | 629904X54A | Discharge chute |
| Model #624804X81 MTD gas snowblower | 624804X81 | Discharge chute assembly |
| Model #624508X4B Murray gas snowblower | 624508X4B | Discharge chute |
Reviews
Not easy to install with 1 person.
Need instructions on how to install. Downloaded the explosion view but it's not clear how it needs to go in with the other ring. Not intuitive how to position it so when it turns it goes full range.
Ray F, Baltimore
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 1 - 2 hours
Yes, I would recommend this to a friend
Delivered fast, and was the exact part!!
Was very pleased that the parts I ordered were the exact parts I needed. They were identical to the original which made the replacement a whole lot easier!
TTask333, Pennsylvania
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
All Good Parts
I ordered six parts for a Sears Snow blower. They all arrived in a reasonable amount of time, well packaged, and packed safely for shipping. All of the parts arrived in excellent condition and they all fit perfectly. I found this to be an excellent way to order parts for this snow blower, it is probably true of all Sears products. Thanks! This put the snow blower in excellent repair and ready for the next snow storm.
cg C, Estes Park, CO
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 1 - 2 hours
Yes, I would recommend this to a friend
Easy to install
It's a decent replacement part... little wobbly but will work
Chris4099, Nicholasville, KY
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour
Just What It Needed
This was an OEM part and fit just right.. no issues and had it installed quickly.
Bill, NJ
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Harder to remove the original part
Wish part was marked with a center point. Otherwise chute can be mounted improperly, limiting the direction of the chute.
Bubba, New jersey
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Easy to install
It was easy to install as long as you have a manual
Wood, Greenwich, CT
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
exact match of my old partSimple replacement
Remove the three chute bolts. Remove the fourth bolt going through the retaining rings. Remove the four bolts holding the base plate and the worm gear bracket. Remove the upper chute ring and three lower chute ring. Reassemble in reverse order.
Bee M, Grand Ledge MI
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes