CONFIRM THE PART FITS

Range Surface Element Control Switch (replaces W10149355) WPW10149355

Part #WPW10149355

Online Only Price
$97.90
| 
11% OFF Phone Price : $109.90
In Stock
For ZIP codes near Edit
60-day return policy 
This part fits

Part Information

This surface element control switch (part number WPW10149355) is for ranges.

Surface element control switch WPW10149355 turns the surface element on and off and controls how much heat the element produces.

Unplug the range or shut off the house circuit breaker for the range before installing this part. Wear work gloves to protect your hands.

Top models using the same part

Model NameModel NumberDiagram Name
Model #YMER8875WW0 Maytag electric rangeYMER8875WW0
Control panel parts
Model #MER8875WB1 Maytag electric rangeMER8875WB1
Control panel parts
Model #YMERH770WS0 Maytag electric rangeYMERH770WS0
Control panel parts
Model #MER8772WW1 Maytag electric rangeMER8772WW1
Control panel parts
Model #MER8772WS1 Maytag electric rangeMER8772WS1
Control panel parts
Model #YMER8772WB0 Maytag electric rangeYMER8772WB0
Control panel parts
Model #YMER8875WS0 Maytag electric rangeYMER8875WS0
Control panel parts
Model #MER8875WW1 Maytag electric rangeMER8875WW1
Control panel parts
Model #YMER8875WW1 Maytag electric rangeYMER8875WW1
Control panel parts
Model #MER8875WS1 Maytag electric rangeMER8875WS1
Control panel parts

Reviews

Easy to install
June 01, 2021

Have been replacing all 4 of them. Took around 45 minutes to do it.

Vasyl, Florida

Did you find this review helpful?

Ease of Installation
Very Easy
Duration of Installation
30 minutes - 1 hour

Yes, I would recommend this to a friend

All set and in the stove. Thank you.
December 20, 2020

Easy to install. My son was our mechanic. Had to wait for him to be home to pull out appliance.

Threw a t i, Connecticut

Did you find this review helpful?

Ease of Installation
Very Easy
Duration of Installation
Less than 30 minutes

Yes, I would recommend this to a friend

Easy to install
March 13, 2019

Easy to take apart and then match up the connectors to the new switch. Screw everything back in. Plug it in and take it for s test drive! All set! $30 saved me from having to buy and all new stove.

John 2, Hazleton, PA

Did you find this review helpful?

Ease of Installation
Very Easy
Duration of Installation
Less than 30 minutes
Easy to install
February 11, 2019

This was really a no brainer to install, pretty straight forward. Just take some pictures before you swap out the part/parts. I replaced both switches for my Whirlpool glass top, especially when I got both for well under the price of one at normal price. These are guineune parts. Here was the issue. On my whirlpool glass top range, model number GFE461LVS, both front burners, the ones that have the dual elements were not working right. The smaller part of the burner did not come on unless I used the dual side of the switch. The smaller burner did work if I held the switch in a certain place. You could feel it working and then when I let go, it would stop working. So I knew it was the switch. They both work great now. I should have taken a picture of the one switch. It had a burn mark on one of the sides. On mine, I used a small screw driver to get the connector off the back of the switch. Just do one at a time. See picture. I hope this was helpful for someone else. I did forget to mention that it was easier to get the connector off the back of the switch by removing the 2 mounting screws that hold the switch in place on the front of the range.

This is the right side looking from the back forward. Forgot to mention that ther were just a few screws to remove the back off the range.

AWC58, Undisclosed

1 person thought this review was helpful.

Ease of Installation
Very Easy
Duration of Installation
Less than 30 minutes
Easy to replace
February 03, 2019

Four screws on panel, two in front and two on back, and two on switch.

Mickeyrud, Georgia

Did you find this review helpful?

Ease of Installation
Easy
Duration of Installation
30 minutes - 1 hour
Part Works, but Bad Packaging
January 08, 2019

The switch works, but whoever pack the item doesn't seems to care as all of the pin of one of the switch arrived all bent. I can straighten them and did but I shouldn't need to so that in the first place. Other than that, the switch is straight forward to replace.

Bent Pins

Zeng, Philadelphia

Did you find this review helpful?

Ease of Installation
Easy
Duration of Installation
30 minutes - 1 hour
easy, plug n play
November 06, 2018

found the right part on searsdirect.com and part was very easy to install. just make sure when you remount your switch that you have the correct orientation for the knob. but otherwise very simple to just unplug the old and plug in the new. thanks!

ahervert, Nebraska

Did you find this review helpful?

Ease of Installation
Very Easy
Duration of Installation
Less than 30 minutes
You can fix it
November 01, 2018

Unplug unit. Remove rear panel, pull knob off faulty control, unplug control, remove control. Reverse earlier instructions to fit new control.

He M, Undisclosed

Did you find this review helpful?

Ease of Installation
Very Easy
Duration of Installation
Less than 30 minutes