CONFIRM THE PART FITS

Refrigerator Ice Maker Fill Tube Heater (replaces WR51X0369) WR51X369

Part #WR51X369

This part is no longer available.

We've permanently sold out of this part. It's no longer available from the manufacturer and the manufacturer has no substitute for this part. Although our call center staff is always happy to help when possible, they don't have access to this part. If you can't find that part and decide to replace the product, we invite you to visit www.sears.com

This part fits

Part Information

This ice maker fill tube heater (part number WR51X369) is for refrigerators.

Ice maker fill tube heater WR51X369 prevents the ice maker water supply line from freezing.

Safely store any food that could deteriorate while the power is off and unplug the refrigerator before installing this part. Wear work gloves to protect your hands.

Reviews

Installation for 42inch Monogram
December 28, 2018

Once you have the icemaker out you can remove the light shield above with a slight pull, and the back cover panel with 6 screws. The first time it is a little daunting but not too bad. Carefully move the left side of the panel toward you and to the right keeping the right side sort of where it is because the light is still attached. You will see the heater coil and it is a simple task to separate the two connectors and replace the element.

Jeanf, Virginia

Did you find this review helpful?

Ease of Installation
Moderate
Duration of Installation
30 minutes - 1 hour