$53.42 |
10% OFF Phone Price : $59.42
CONFIRM THE PART FITS
Part Information
This suspension rod kit (part number W10780046) is for washers.
Suspension rod kit W10780046 supports the wash tub and keeps it stable during unbalanced loads. The kit may include multiple parts; refer to your parts diagram for a complete list of parts included.
Unplug the washer before installing this part. Wear work gloves to protect your hands.
Frequently Used Together
- $44.18 |12% OFF Phone Price : $50.18
- $89.58 |6% OFF Phone Price : $95.58
- $88.43 |6% OFF Phone Price : $94.43
- $191.77 |6% OFF Phone Price : $203.77
- $25.76 |19% OFF Phone Price : $31.76
- $173.11 |6% OFF Phone Price : $185.11
- $33.62 |15% OFF Phone Price : $39.62
- $5.30 |16% OFF Phone Price : $6.30
- $54.88 |10% OFF Phone Price : $60.88
Top models using the same part
| Model Name | Model Number | Diagram Name |
|---|---|---|
| Model #MVWC300XW0 Maytag washer | MVWC300XW0 | Basket and tub parts |
| Model #11021352110 Kenmore washer | 11021352110 | Basket and tub parts |
| Model #11021252110 Kenmore washer | 11021252110 | Basket and tub parts |
| Model #WTW4850XQ0 Whirlpool washer | WTW4850XQ0 | Basket and tub parts |
| Model #7MMVWC420BW0 Maytag washer | 7MMVWC420BW0 | Basket and tub parts |
| Model #7MMVWC220AW0 Maytag washer | 7MMVWC220AW0 | Basket and tub parts |
| Model #7MMVWC310YW1 Maytag washer | 7MMVWC310YW1 | Basket and tub parts |
| Model #7MMVWC310YW0 Maytag washer | 7MMVWC310YW0 | Basket and tub parts |
| Model #MVWC350AW0 Maytag washer | MVWC350AW0 | Basket and tub parts |
| Model #MAT20MNAGW0 Maytag washer | MAT20MNAGW0 | Basket and tub parts |
Reviews
Wrong Part
The new suspension rods were approx. 4.5 inches shorter than the originals. I used a torch, anvil and hammer to swap out the new springs to the original rods. Very disappointed for the price and didn't want to wait on replacements.
S_OH, Columbus Ohio
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- More than 2 hours
normally easy to install
Product doesn't fit the way it is intended to fit. Allows tub to drop too low
Juanita, eau claire wi
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour
Fairly easy to install. Repaired my problem!!
Look up the top removal procedure. If it does not open easily, you're doing something wrong-don't force it! I found 2 different top removals for the "same model". Also, if you can set all 4 corners up about 6-8" (on blocks,eg.) it would be a very easy installation. You cannot replace the rods with the machine sitting on the floor, I had to tip forward/rearward for the rods to clear... made it a little difficult since the top was wanting to move around (and too stubborn to ask the wife for a hand). If I had to do it again... less than 10 minutes, no problem.
gwing, north carolina
1 person thought this review was helpful.
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour