$30.22 |Â
17% OFFÂ Phone Price : $36.22
CONFIRM THE PART FITS
Range Oven Door Hinge Kit (replaces 316406910) 5304445529
Part #5304445529
Online Only Price
$137.65 |Â
8% OFFÂ Phone Price : $149.65
In Stock
For ZIP codes near Edit
This part fits
Part Information
Helpful DIY instructions: Installation guide and video.
Special details: Replace the hinges and receptacles included in range oven door hinge kit 5304445529 together for the hinges to work properly.
This oven door hinge kit (part number 5304445529) is for ranges.
Oven door hinge kit 5304445529 includes both door hinges that connect the oven door to the range cabinet on each side. The hinges control the rate at which the door opens and allow the door to stay open at an angle. The kit includes 2 hinges and 2 hinge receptacles.
Wear work gloves to protect your hands when installing this part.
Frequently Used Together
- $166.95 |Â7% OFFÂ Phone Price : $178.95
- $138.09 |Â8% OFFÂ Phone Price : $150.09
- $12.19 |Â14% OFFÂ Phone Price : $14.19
- $36.15 |Â14% OFFÂ Phone Price : $42.15
- $14.76 |Â12% OFFÂ Phone Price : $16.76
- $121.62 |Â9% OFFÂ Phone Price : $133.62
- $41.22 |Â13% OFFÂ Phone Price : $47.22
- $27.06 |Â18% OFFÂ Phone Price : $33.06
Top models using the same part
| Model Name | Model Number | Diagram Name |
|---|---|---|
| Model #FEF352DWA Frigidaire electric range | FEF352DWA | Door |
| Model #FEF352DSA Frigidaire electric range | FEF352DSA | Door |
| Model #FEF352DUA Frigidaire electric range | FEF352DUA | Door |
| Model #FEFS52DQA Frigidaire electric range | FEFS52DQA | Door |
| Model #FEFS52DSA Frigidaire electric range | FEFS52DSA | Door |
| Model #79096010400 Kenmore electric range | 79096010400 | Door |
| Model #79096314400 Kenmore electric range | 79096314400 | Door |
| Model #79096134400 Kenmore electric range | 79096134400 | Door |
| Model #79096020400 Kenmore electric range | 79096020400 | Door |
| Model #79096012400 Kenmore electric range | 79096012400 | Door |
Reviews
EASY TO INSTALL YES INDEED
IT WAS VERY EASY TO INSTALL. 25 MINUTES. WAS MY HUSBAND 1ST OVEN HINDGE RELPACEMENT
OVEN D H 2, CHESTERFIELD VIRGINIA
Did you find this review helpful?
- Ease of Installation
- Very Difficult
- Duration of Installation
- More than 2 hours
Easy to install
The part was an exact fit. The door closes tight now. The installation was easy. The cleaning took longer than anything else.
BusboyR3, Fayette. Mo.
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Wrong part. Did not fit!!!
Had to change out receivers as well as the hinges. Would have been nice to know that up front
Bill, Cumming, Ga
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes
Yes, I would recommend this to a friend
Very easy to install
Took about 25 minutes from start to finish including clean up
Acjr, Pa
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes
Door closes properly now
Oven door was not closing (gap at the top edge) so we decided to try replacing the hinges and that did the trick! Closes tightly now.
JenniH, Hawaii
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour
Easy to install and solved the problem
Very easy to install and solved the problem!!! Thanks for sending it so quickly, too.
Mrjbtx, Poconos, PA
Did you find this review helpful?
- Ease of Installation
- Very Difficult
- Duration of Installation
- Less than 30 minutes
Worked well, but screw holes were not threaded.
I purchased this kit because the oven door was no longer closing all of the way. I found the "pockets" into which the door hooks were slightly bent where the hinge pressed into them. Replacing the hinge and pockets fixed the problem and the door once again closes completely. To replace the hinge itself it is necessary to disassemble the door. Not too hard, but took some time and was a good opportunity to clean in between the panes of glass. The big issue I had was the new "pockets" that came with the kit into which the doors hook. The kit came with machine screws, but the pockets did not have tapped threads (two holes in each pocket). Since I didn't have the correct tap I had to manually cut the threads using the machine screws. FYI, the screws are a combination phillips and square drive. To cut the threads using the provided screws I found that using a square drive driver instead of phillips was much easier. It would be great if the screw holes were either pre-tapped for the threads, or the screws they provided were the thread tapping type. It seemed odd that the holes were not tapped. Maybe I just received a bad part the slipped past QA?
bmcq, Livonia, MI
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour
No help for returning product
I used the online help to order oven door hinge. The part is incorrect and does not fit.
Carol60, WI
Did you find this review helpful?
- Ease of Installation
- Very Difficult
- Duration of Installation
- More than 2 hours