$103.04 |Â
10% OFFÂ Phone Price : $115.04
CONFIRM THE PART FITS
Refrigerator Ice Maker (replaces W10190961) WPW10190961
Part #WPW10190961
Online Only Price
$114.44 |Â
9% OFFÂ Phone Price : $126.44
In Stock
For ZIP codes near Edit
This part fits
Part Information
Ice maker WPW10190961 includes the ice mold and the control device. The ice maker receives water from the water inlet valve and then holds the water in the ice mold until the water freezes solid. It then automatically ejects the ice and refills to continue the process until the ice storage bin is full.
If your ice cubes seems small, it could be time for a new water filter. You can find your filter here.
Safely store any food that could deteriorate while the power is off and unplug the refrigerator when installing this part. Wear work gloves to protect your hands.
Frequently Used Together
- $195.37 |Â6% OFFÂ Phone Price : $207.37
- $38.92 |Â13% OFFÂ Phone Price : $44.92
- $10.35 |Â16% OFFÂ Phone Price : $12.35
- $19.29 |Â9% OFFÂ Phone Price : $21.29
- $50.37 |Â11% OFFÂ Phone Price : $56.37
- $65.52 |Â8% OFFÂ Phone Price : $71.52
- $68.97 |Â8% OFFÂ Phone Price : $74.97
- $10.86 |Â16% OFFÂ Phone Price : $12.86
Top models using the same part
Reviews
Easy for y husband to install
Can't go back to filling ice cube trays, and can't buy a whole new refrigerator right now.
June, Michigan
Did you find this review helpful?
- Ease of Installation
- Difficult
- Duration of Installation
- 1 - 2 hours
Yes, I would recommend this to a friend
Easy to indtall
Easy to install, you have to use the old bracket for sliding in the ice maker.
Mike, Diberville MS
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
The right part
One socket wrench. A little confidence. Finding the right part. Works like new.
Jimmy, Bergen county, NJ
Did you find this review helpful?
- Ease of Installation
- Difficult
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Ice maker damged
Received the ice maker damaged. The water fill plastic portion was broke where it hooked on rod.
Jp 8, Maine
1 person thought this review was helpful.
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
NO instructions
After I figured out that the wire was long enough to pill it out far enough to plug it in, it went great !! The wire was cold and would not pull easily so I didn't want to break it or pull it out of the freezer ! A little peace of paper that said wire is long enough to pull out to plug it in with out fear of breaking or pulling from the wall !! WOULD have been nice !!!!
Joe C, Naperville, Il.
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Kenmore Elite Refrigerator Ice Maker
Remember to turn off your freezer for better installation.
Undisclosed, El Centro, California
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour
Ice Maker
Other than removing our ice-over broken ice maker, the install of the new one was pretty easy. Thanks for helping us save almost $200!
Mike J, Pasadena, CA
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 1 - 2 hours
Yes, I would recommend this to a friend
Simple Fix after Initial Bumps
Our icemaker began getting intermittent, then stopped completely. I think when ice got stuck in the input drip cup, it may have caused the icemaker motor to burn out. Replacing the whole assembly was simple and ensured I didn't miss other problems such as a worn shaft if I only replaced the motor. The problem I ran into was actually getting the correct part. The first one I received was much too wide, and when I reordered, at first Sears gave me the wrong part number again. I contacted chat (easy to use) a 3rd time and explained why I was concerned the unit wouldn't fit, and they finally got me the correct part number. Looking at the picture, I saw the first incorrect one had 7 "fingers" instead of 5. They should include width dimensions to make things easier. Now it's working again and we're very happy.
Doug B, Streamwood IL near Elgin.
1 person thought this review was helpful.
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes
Yes, I would recommend this to a friend