CONFIRM THE PART FITS
Refrigerator Water Inlet Valve Assembly (replaces 241734302) 242252702
Part #242252702
Part Information
This water inlet valve assembly (part number 242252702) is for refrigerators.
Water inlet valve assembly 242252702 supplies water to the ice maker and water dispenser in the refrigerator.
Safely store any food that could deteriorate while the power is off and unplug the refrigerator before installing this part. Wear work gloves to protect your hands.
Frequently Used Together
- $44.92 |Â12% OFFÂ Phone Price : $50.92
- $153.02 |Â7% OFFÂ Phone Price : $165.02
- $21.99 |Â21% OFFÂ Phone Price : $27.99
- $43.65 |Â12% OFFÂ Phone Price : $49.65
- $49.98
- $21.49 |Â22% OFFÂ Phone Price : $27.49
- $104.32 |Â10% OFFÂ Phone Price : $116.32
- $128.14 |Â9% OFFÂ Phone Price : $140.14
- $152.07 |Â7% OFFÂ Phone Price : $164.07
- $150.62 |Â7% OFFÂ Phone Price : $162.62
Top models using the same part
Model Name | Model Number | Diagram Name |
---|---|---|
Model #EI28BS55IW1 Electrolux bottom-mount refrigerator | EI28BS55IW1 | Ice maker |
Model #E23BC78IPS0 Electrolux bottom-mount refrigerator | E23BC78IPS0 | Ice maker |
Model #E23CS78HPS2 Electrolux side-by-side refrigerator | E23CS78HPS2 | Ice maker |
Model #EI23BC56IB0 Electrolux bottom-mount refrigerator | EI23BC56IB0 | Ice maker |
Model #EW23BC70IS0 Electrolux bottom-mount refrigerator | EW23BC70IS0 | Ice maker |
Model #EW28BS71IW0 Electrolux bottom-mount refrigerator | EW28BS71IW0 | Ice maker |
Model #EI28BS55IB1 Electrolux bottom-mount refrigerator | EI28BS55IB1 | Ice maker |
Model #E23CS78HSS0 Electrolux side-by-side refrigerator | E23CS78HSS0 | Ice maker |
Model #EI28BS55IS1 Electrolux bottom-mount refrigerator | EI28BS55IS1 | Ice maker |
Model #E23BC78ISS0 Electrolux bottom-mount refrigerator | E23BC78ISS0 | Ice maker |
Reviews
Great part. Perfect fit. Shipping cost sucked.
Part worked great. But the shipping time and cost sucks. Most places has free 2 day shipping. yours was around $15.00 bucks and took around a week.
Bigdog, ky
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Easy install.
Install took about 20 min and resolved the issue. Water to the door worked fine, but the ice maker wasn't getting water so it wouldn't make ice. Resolved' that being said the Fridgidaire refrigerator and ice maker is absolute garbage and I'll never buy another one' but the part was great :)
Kypewerks, GA
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes
Yes, I would recommend this to a friend
Easy install
Easy to replace but need to last longer! This was my second time I replace this part on a 7 years old fridge!
Sam D, Cleveland
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes
Yes, I would recommend this to a friend
Easy to install
Replacement of original (had an apparent leak in the valve housing) was pretty obvious and straight forward, no need to consult directions. Electrical connectors are color coded, just needed to make a note of which plastic tube goes to which part of the multi-port valve assembly.
Logpile, Colorado
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Perfect fit
The valve was a little pricey but well worth the money.
fixit g, Chesterfield, Va.
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes
Yes, I would recommend this to a friend
not exactly the same - better
The main water valve on 16YO fridge leaked ... for a while, not discovered until enough water came down through the floor, ran along a beam, and dripped on the basement floor. Glad this part was available. The replacement part had two improvements, a slightly angled inlet connector and friction fit for the four plastic tubes instead of screw-on. I worried about the friction-fit since I had to cut off the nozzle on the fridge tubes to make a plain end to push into the new assembly. But they all fit without leaks. Overall, except for the pain of accessing the back corner of the fridge, the replacement job wasn't bad at all even for this non-handyman.
vectorizer, Philly burbs
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
quality valve set
Did not need it was the Ice maker unit. This part was sent back without a hassle.
John75, ID
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes
Yes, I would recommend this to a friend
Very very easy to install.
Watched one YouTube video. Installed in 10 minutes with no special tools. All connections were clearly color coded
Rick, Cleveland
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes
Yes, I would recommend this to a friend