$70.88 |
8% OFF Phone Price : $76.88
CONFIRM THE PART FITS
Washer Inlet Flow Meter (replaces W10110225) WPW10110225
Part #WPW10110225
Online Only Price
$80.79 |
7% OFF Phone Price : $86.79
In Stock
For ZIP codes near Edit
This part fits
Part Information
Inlet flow meter WPW10110225 is an original equipment manufacturer (OEM) part that fits some front-load washers in the following series: Kenmore and Kenmore Elite 110; Whirlpool 7MGH, 7MWF, GHW, WFL and WFW; Maytag 7MMH, MFW, MHW and MHWE; and KitchenAid KHW.
Inlet flow meter WPW10110225 measures the amount of water entering the washer.
Replaces original front-load washer inlet flow meter part numbers W10110025 and 8181696.
Frequently Used Together
- $52.42 |10% OFF Phone Price : $58.42
- $6.47 |13% OFF Phone Price : $7.47
- $59.21 |9% OFF Phone Price : $65.21
- $109.26 |10% OFF Phone Price : $121.26
- $387.99 |$12.00 OFF Phone Price : $399.99
- $187.88 |6% OFF Phone Price : $199.88
- $43.73 |12% OFF Phone Price : $49.73
Top models using the same part
| Model Name | Model Number | Diagram Name |
|---|---|---|
| Model #WFL98HEBU0 Whirlpool washer | WFL98HEBU0 | Dispenser parts |
| Model #WFW97HEXR3 Whirlpool washer | WFW97HEXR3 | Dispenser parts |
| Model #WFW97HEXL1 Whirlpool washer | WFW97HEXL1 | Dispenser parts |
| Model #MHW7000XG1 Maytag washer | MHW7000XG1 | Dispenser parts |
| Model #7MWFW95HEYL0 Whirlpool washer | 7MWFW95HEYL0 | Dispenser parts |
| Model #WFW97HEXW1 Whirlpool washer | WFW97HEXW1 | Dispenser parts |
| Model #WFW97HEXR0 Whirlpool washer | WFW97HEXR0 | Dispenser parts |
| Model #MHW9000YG0 Maytag washer | MHW9000YG0 | Dispenser parts |
| Model #MHW8000AW0 Maytag washer | MHW8000AW0 | Dispenser parts |
| Model #MHW8000AG0 Maytag washer | MHW8000AG0 | Dispenser parts |
Reviews
Just what I needed
Original issue of a clogged inlet valve but should have replaced the flow meter at the same time. The hardest part is taking the dryer off the washer (stackable). Got them both quickly from sears! Thank you.
Eralph, WI
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Easy to install
The part was easy to install and fixed my washer, which would not complete the wash cycle and was displaying "H F" error code.
Richard, Rowlett, TX
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes
Yes, I would recommend this to a friend
Fixed it myself!
The part I received was not identical to the part I replaced which made me worry the wrong part had been sent. My washer is a few years old so I suspected modifications had happened. (The part I received was black and smaller than the part I removed.) It took me about 15 minutes to install the part and I ran two loads of laundry without getting the F20 error. Hurray!
Gene, Junction City, KS
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Whole thing took 2min!
Seriously I was surprised to see how quick And easy it was to swap the old with the new. My washer is like new-I am very grateful and happy with my purchase!
Kathleen, South Jersey
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes
Yes, I would recommend this to a friend
Flowmeter easy fix
My 16 year old Kenmore washer was reporting F/H and diagnostics indicated problem was either flowmeter or solenoids. I ruled out a solenoid issue since I could see water was entering the tub. 3 screws to remove the top, 2 clamps to remove on the flowmeter. Easy quick fix. I found a video on line that helps. Screws are a torque T20 size, but you can use a hex wrench instead.
Bill, St Louis
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
I was shipped the wrong part
I put in my model number, and the flow meter it suggested for my washer ended up to be the wrong meter, and as a result I had to spend extra money to have my machine fixed. Had they shipped me the correct part, it would have had saved me time, energy, and money.
RayMoro, Los Angeles
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Worked out great
Flow meter stopped working on my Kenmore elite front load Changed it out and now works great
Birdman, Chicago
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes
Yes, I would recommend this to a friend
Pretty easy to install
I'm a single mom and I had it done in about 20 min.
Ali04, Alaska
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend