CONFIRM THE PART FITS

Washer Outer Rear Tub Assembly (replaces 3044ER0021B, 3045ER0048E, 3045ER0048R) 3045ER0048J

Part #3045ER0048J

This part is no longer available.

We've permanently sold out of this part. It's no longer available from the manufacturer and the manufacturer has no substitute for this part. Although our call center staff is always happy to help when possible, they don't have access to this part. If you can't find that part and decide to replace the product, we invite you to visit www.sears.com

Only ground shipment is available for this item.

This part fits

Part Information

This outer rear tub assembly (part number 3045ER0048J) is for washers.

Outer rear tub assembly 3045ER0048J fits around and supports the spin basket and attaches to the outer front tub, sealing water inside the washer. The assembly may include multiple parts; refer to your parts diagram for a complete list of parts included.

Unplug the washer before installing this part. Wear work gloves to protect your hands.

Reviews

Doesn't include the gasket!!
March 06, 2022

Noticed too late that this doesnt come with the gasket and the website doesn't state nor show that it's not included with the tub assembly either. You'd think that the gasket is part of the tub so it would be included..... wrong!! Took the entire appliance apart, replaced the tub assembly and put it back together in about 6hrs. Tested it afterward and noticed that there was a substantial leak. I was forced to completely disassemble the appliance again and reuse the gasket off the old tub assembly. I resembled and luckily the old gasket sealed and stopped the leak. Depending on your skill this takes about 4-6 hours to complete. It took me 8 hours after having to dissemble it twice.

Ivan, Vail, CO.

Did you find this review helpful?

Ease of Installation
Very Difficult
Duration of Installation
More than 2 hours

Yes, I would recommend this to a friend

Takes some time but easy to install
February 13, 2022

Rear tub install was fairly easy, several videos on YouTube.

The h m, Union County, NJ

Did you find this review helpful?

Ease of Installation
Easy
Duration of Installation
1 - 2 hours

Yes, I would recommend this to a friend

Relatively easy to install bit took some time.
March 23, 2021

All told, from start to wash was around 4.5 hours. Substantial disassembly was required and required some heavy lifting. Everything went per on line instructions. No surprises. Don't forget to purchase a new tub seal!

Marci, Ma.

Did you find this review helpful?

Ease of Installation
Moderate
Duration of Installation
More than 2 hours

Yes, I would recommend this to a friend

Great inventory and service!
July 02, 2020

I got the exact assembly I needed at a great price. It was delivered in perfect condition and came in only 2 days - much quicker than the 6 days promised.

Pat i C, Coatesville, PA

Did you find this review helpful?

Ease of Installation
Difficult
Duration of Installation
More than 2 hours

Yes, I would recommend this to a friend

Repair a nosey washer during spin cycle.
May 01, 2020

Part was a direct match that fit perfectly with no problems.

Jerry1950, Undisclosed

Did you find this review helpful?

Ease of Installation
Moderate
Duration of Installation
30 minutes - 1 hour
Quick delivery - perfect fit!
March 19, 2020

For appliance repairs, I always check Sears Parts Direct because of their wide variety of parts. They had the exact part that I needed. I used the online chat to confirm the part that I needed and got a discount to boot. It took me a good 10 hours to install the part but I was being very deliberate so I took my time. My washer is running like and new. Thanks again to Sears! I highly recommend Sears for your appliance parts.

Another view of the full tub assembly. The tub is white from detergent residue. I pressure washed it before re-installing.
A close look at the interior of the outer rear tub assembly that I replaced. The bearing was really noisy but the new tub did the trick. It sounds like a dream now.
Preparing to separate the tub assembly halves.
Tub assembly removed from the washer.
Closer overhead view of washer tub assembly.
Overhead view of tub assembly in washer.

inthename, Hampton VA

Did you find this review helpful?

Ease of Installation
Difficult
Duration of Installation
More than 2 hours

Yes, I would recommend this to a friend

Easy if you know what you're doing
September 18, 2019

Requires attention to details and removal of 90% components in order to replace the rear tub. Time required is about 4 hours for careful removal and assembly. Part come with attached hoses and bearings; however, no rubber gasket; has to be purchase separately. Overall very easy job.

LG_appl_Owner, SF Bay area

Did you find this review helpful?

Ease of Installation
Moderate
Duration of Installation
More than 2 hours
All it claims to be
January 24, 2019

This part is exactly as described and there is not need to purchase the hoses separately. I recommend you replace the gasket where the two tubs join. All said and done, the installation is moderately easy but time consuming if you have never done it before.

pilgrimfive, texas

Did you find this review helpful?

Ease of Installation
Moderate
Duration of Installation
More than 2 hours